|
Natoma Corporation currently uses
more than twenty CNC machines in production and inspection to
create and control the quality of parts as needed for our customers.
Mill programming is done efficiently by experienced programmers with professional software, whereas our lathe setup
technicians write programs directly at the machine, although they are
stored remotely for repeated use.
See the
Capabilities page for a larger overview of what Natoma Corporation can
do for you, our Software
page for additional information on Windows-based programs used in
production and inspection, and the Inspection page to
read about our quality department. Below is an overview of the
machines. Click on any picture for a larger view.
|
|
|
|
Picture
|
Quantity
|
Description and Specs
|
|
|
1
|
Cincom Citizen L25
1" bar capacity, up to 10" turning length, swiss, 5 stationary 5/8
stick tool stations, 7-axis including full c axis on main and sub (locks
every 5 degrees main only)
|
|
|
1
|
Cincom Citizen L20E
3/4" bar capacity, up to 7.875" turning
length, swiss, 32 tooling stations, 7-axis, 5 cross and 14 face live tools
|
|
|
1
|
Hardinge Conquest 42-SP
2" bar capacity (or 6" collet chuck), up to 12" turning
length, super-precision, 10-station turret, 2-axis, tailstock
|
|
|
1
|
Hardinge Conquest T-42
1 5/8" bar capacity (or 6" collet chuck), up
to 8" turning length, 10-station turret, 2-axis
|
|
|
2
|
Hardinge Conquest GT-SP
1 1/16" bar capacity, up to 10" turning
length, super-precision, 8 gang stations, 2-axis
|
|
|
1
|
Nakamura-Tome WT-150
2" bar capacity, up to 16" turning length, subspindle, main and
lower 12-station turrets with 1/2 index, 24 live tools
(12 on main and 12 on sub), 7-axis including full c axis on main and sub
|
|
|
1
|
Nakamura-Tome WT-250
2.5"
bar capacity, up to 16" turning length, subspindle, main and lower
12-station turrets with 1/2 index, 24 live tools (12 on
main and 12 on sub), 7-axis including full c axis on main and sub
|
|
|
10
|
Fanuc T21 Robodrill
7/24 taper No.30, 2125 ipm rapid traverse rate, 1181 ipm max feedrate, 21
tool changer capacity, 5th axis capability
5 with full 4th axis, 3 wired for 4th axis indexer
3 with pallet changer
6 with 24,000 rpm max spindle speed
4 with 20,000 rpm max spindle speed
|
|
|
2
|
Fanuc Robodrill Mate
7/24 taper No.30, 1437 ipm rapid traverse rate, 590 ipm max feedrate, 14 tool
changer capacity, 4th axis capability
|
|
|
1
|
Feeler HV-800
30 HP 15,000 max rpm spindle, 37.4 x 20.5 inch table size,
full 4th axis, 1.9sec tool-to-tool
change time
|
|
|
1
|
Toyoda FA400
ISO R297 Taper No.40, horizontal mill, 1968 ipm max feedrate and rapid
traverse rate, 61 tool changer capacity, 14,000 rpm max spindle speed
|
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)